Kb-electronics KBWA-23D Manual do Utilizador descarregar pdf (Página 28)

FIGURE 16

TYPICAL HI-POT TEST SETUP

12 TRIMPOT ADJUSTMENTS

The drive contains trimpots which are factory set for most applications. See Figure 2,

on page 8, for the location of the trimpots and their approximate factory calibrated

positions. Some applications may require readjustment of the trimpots in order to tailor

the drive for a specific requirement. The trimpots may be readjusted as follows.

WARNING! If possible, do not adjust trimpots with the main power

applied. If adjustments are made with the main power applied, an insulated

adjustment tool must be used and safety glasses must be worn. High voltage

exists in this drive. Fire and/or electrocution can result if caution is not

exercised. Safety Warning, on page 2, must be read and understood before

proceeding.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Sem comentários

Kb-electronics KBWA-23D Manual do Utilizador Página 28