Kb-electronics KBPC-240D Manual do Utilizador descarregar pdf (Página 10)

Control Set for 230 VAC

(Factory Setting)

Control Set for 115 VAC

TABLE 3 – SETTING AC LINE VOLTAGE

WITH JUMPER J2A and J2B

FIG. 5 – MOTOR OUTPUT TORQUE vs POTENTIOMETER ROTATION – [TORQUE MODE]

FIG. 6 – MOTOR SPEED vs APPLIED MOTOR LOAD – [TORQUE MODE]

B. J2A, J2B – Input AC Line Voltage –

Select proper input line voltage

115VAC or 230VAC by placing both

J2A and J2B in the correct

corresponding positions, "115V" or

“230V.”

C. J3 – Armature Voltage Output and

Tach-generator Feedback – Select

the desired armature voltage by

placing J3 in the proper position “90V”

for 90 – 130VDC motors and “180V"

for 180 – 220 VDC motors. For

115VAC line input the armature voltage must be set to “90V.”

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Sem comentários

Kb-electronics KBPC-240D Manual do Utilizador Página 10